Electrolytic galvanized steel for metal stamping parts Electrolytic galvanized steel is a cold-rolled steel with the above three types of cold-rolled steel plates as the base material and after surface treatment such as electrolytic galvanizing. Its chemical composition and mechanical properties are the same as those of the above-mentioned...
1) The shape of the bending part should be as symmetrical as possible, and the bending radius should not be less than the minimum bending radius allowed by the material. 2) The curved side is too short to form, so the straight part of the curved side should be made H>2δ. If H is required to be very short, it is necessary...
Stamping die is an indispensable die in stamping production. Punching dies can be basically divided into three types: simple dies, continuous dies and composite dies. (1) Guangzhou metal stamping simple die A simple die is a die that only completes one process in one stroke of the punch. When working, the strip is fed between...
The processing design principles of Dongguan stamping parts are as follows: First, the designed stamping parts must meet the use and technical performance of the product, and it must also be easy to assemble and repair; then it must be conducive to improving the utilization rate of metal materials, reducing the variety...
Custom furniture is in line with living habits. Some people like wooden furniture, which has strong affinity, simple and natural, casual and stress-free and emotional, while some people like post-modern, exaggerated, publicized, and unconventional. Some people like shorter furniture, others like taller furniture, and this differentiated demand is far more than that...
The development of China's fasteners is due to the vigorous development of countless small and medium-sized private enterprises, but generally speaking, the degree of technologicalization is not high, and the development of enterprises is slow. In the long run, it is not suitable for the development of world trade...
Total:6
Total Pages:1 |
Page:1
9First Page
7Previous
Next8
Last Page:
Jump: